2011–2019 Chrysler 300
Chrysler 300 third brake light with sequenced LEDs — subtle at a glance, unmistakable when you brake.
Ships pre-programmed with two patterns of your choice — one BRAKE, one SHOW. Custom patterns and free lifetime reprogramming available.
- OEM assemblyModified original equipment — guaranteed factory fit
- Plug-N-PlayNo cutting or splicing, installs in minutes
- Sequenced LEDsA moving light draws more attention than a static one
- Sealed & road-readyBuilt to hold up to weather and washing
Select both a BRAKE pattern and a SHOW pattern to continue.
How it works
***Our BACKUP CAMERA COMPATIBLE assemblies DO NOT include the backup camera module. The lense has the hole to fit the camera, but you MUST remove the backup camera from your existing light and install it in ours.
This is an OE component, direct from the dealership, that has been modified with a sequential 6-LED board. It's Plug-N-Play!
Unit ships pre-programmed with two patterns of your choice, BRAKE and SHOW.
BRAKE = this pattern is activated upon hitting the brakes. This pattern will run for 4 seconds and then ALL the LEDs will come on solid until you let off the brake.
SHOW = this pattern is activated when the "show" wire is connected to any 12V+ source, this can be done using our Show Mode Easy Install Kit (sold separately), a switch at your dash or connected directly to your vehicles tail/running lights. Connection must be a 12V POSITIVE source. If the SHOW mode is on, and you hit the brake, the BRAKE pattern will always override the SHOW pattern for as long as the brake is held down. The show pattern will resume once the brake is released. The show pattern is a continuous sequence.
Choose from the pattern list or have us CUSTOMIZE a set of patterns for you
*** Backup Camera Compatible model requires you to take the camera module out of your existing assembly and install it in our assembly. Simply remove one screw and its an easy swap!
