2011–2020 Dodge Durango

This is an OE assembly that has been modified with a custom sequential 6-LED circuit board. We take the light apart, swap the stock circuit board with ours, seal the light back up and put the program of your choice in. It's Plug-N-Play!

Unit ships pre-programmed with two patterns of your choice, BRAKE and SHOW.

BRAKE = this pattern is activated upon hitting the brakes. This pattern will run for 3 seconds and then ALL the LEDs will come on solid until you let off the brake.

SHOW = this pattern is activated when the "show" wire on the back of the light is connected to any 12V+ source, this can be done using our Show Mode Easy Install Kit (sold separately), a switch at your dash or connected directly to your vehicles tail/running lights. Connection must be 12V POSITIVE. If the SHOW mode is on, and you hit the brake, the BRAKE pattern will always override the SHOW pattern for as long as the brake is held down. The SHOW pattern will resume once the brake is released (if you have the SHOW mode on). The SHOW pattern is a continuous sequence.

Ask us about our DYNAMIC brake pattern options! garrett@seequenced.com or text 706-741-4949

Choose from the pattern list above. Have a CUSTOM pattern idea? Please reach out to us and we will work with you on creating your custom pattern(s) at no additional charge!

Want to sell us your core? We will buy your existing 3rd brake light for $20, even if it doesn't work! Core return details will be included in your order. We will also cover the shipping. Once received, we will refund $20 to your original order.

We also offer FREE LIFETIME REPROGRAMMING! Simply pay for shipping both ways and we will change your patterns at no charge!